SCOPE OF APPLICATION:

Building floor and roof, ground joints, tile gaps, kitchen and bathroom, swimming pools, reservoirs, drainage ditches and other waterproof works.

WATERPROOF PRINCIPLE:

This product penetrates under the base layer and crystallizes to form a waterproof layer, which does not affect the appearance of the base surface and has a long service life.

INSTRUCTIONS:

1. Before construction, clean the dust and loose structures on the base surface to ensure that the base surface is dry and free of dirt.

2. Find the leak, directly pour, spray, and brush the product to the place to be repaired, wait for the product to penetrate deeply, repeat the operation 2-3 times to enhance the effect, and the time interval between each time is 1-2 hours.

3. If there are cracks (gap greater than 2 mm), fill the gap with cement mortar, and then use this product to repair according to the instructions after the mortar is cured.

MAIN INGREDIENTS: water-based resin， penetrant ，hydrophobic agent

PRECAUTIONS:

1. This product is suitable for pure cement base surface. It cannot be used for non-absorbent coatings such as beautifying agent, liquid coil, polyurethane waterproof glue, etc.

2. The crack is larger than 2 mm, especially the leakage caused by cracks at the joint between the water pipe and the ground, and the wall and the ground. In special circumstances, it is recommended to consult first.

3. Do not test the water within 24 hours of construction, so as not to affect the repair effect.

4. Excessive spraying, the residual product will form white particle crystals on the surface, just wipe it off with a soft cloth

5. When not used up, please seal and store in a cool place. This product is not edible. Keep away from children.

Shelf life:Two years

Production Date: See Packaging