Volume : 180ml
Range of use: Poolside, skirting, etc.

Scope of application: Suitable for indoor damp and mildew-prone environments such as kitchens bathrooms, bathtubs, wash basins, toilets, faucets, floor tiles, glass, etc. to prevent mold, seal, and bond.

Instructions:
1. Clean the construction surface to ensure no oil, dust and moisture.
2. After unscrewing the cap, align the tip vertically at the tile gap, and squeeze the paste evenly along the gap (Note: You can also paste masking paper along the edge of the tile gap, then squeeze the paste out, and then smooth the paste. You can tear it off later).
3. Wipe off the excess glue immediately to prevent it from being difficult to clean up after the glue has cured.
4. The curing time is about 2-3 days. Avoid water during this period.
5. In winter, the temperature is low, this product may become viscous, it is recommended to use hot water soaking before use.

Main ingredients: Resin, sodium silicate, titanium dioxide, water, etc.

Precautions:
1. Sealed and stored in a cool and dry place, prevent high temperature, sunlight, and freezing.
2. When applying glue, coat the bonding area as thick as possible. When applying glue to the gap, the tip should be perpendicular to the gap, it is advisable to squeeze the glue into the gap and fill the gap;
3. Depending on the usage environment, the curing time will take 2-3 days. This product will take longer to cure in a humid environment. Please ventilate and keep the construction environment dry.
4. The suitable storage and transportation temperature is -5 to 50. When the temperature is lower than -10, the effect of this product will be affected. It is recommended not to use it in low temperature conditions.
5. Avoid contact with children. If it gets into eyes accidentally, rinse with water and seek medical attention if necessary.